It has been one year since we completed the relocation. The facilities are ready for QUANTITY orders in this busy season!!!
Home
1
Laser Systems
2
CO2 EDH/EDF-Screw+Belt
3
EDF-130090-100~200W CO24
https://www.laserlife-ezlaser.com/custom_83700.html EDF-130090-100~200W CO2 EDF-130090-100~200W CO2 EDF-130090 CO2 Laser Engraving and Cutting System (Flying-Optics Design; Working Area:130x090 cm)  # Key Features:1. PIN-Touch Auto-Focus Unit: (300mm working table Z-axis adjustment)   2. High Motion Speed: a.2032mm/sec (Engraving or Rastering)                                      b.203.2mm/sec(Cutting or Vectoring)3. High Resolution Engraving: 1200 DPI/600 DPI/400 DPI/300 DPI     and lower DPI are available.(2400 DPI optional).4. Good for big objects (material): EDF accommodates objects of 1300mm    wide and has no constraints on the length of them with thickness less    than 50mm.(so called Pass-Through function)   via following link to get the catalog:1. 100W/200W : EDF-130090-Water Cooled 100W 200W CW RF Lasers - 2019-1203.pdf
Laser Systems
others
~~ Compact Fiber Laser Cutter for Metals ~~ Different Models Including : CSB-090060 / CSB-060060 / CLB-126128 / CLB-090060
Home Laser Systems CO2 EDH/EDF-Screw+Belt EDF-130090-100~200W CO2

EDF-130090 CO2 Laser Engraving and Cutting System
 (Flying-Optics Design; Working Area:130x090 cm)  

b7b284e8095e118e72b8dea99a3fa13b.jpg














# Key Features:

1. PIN-Touch Auto-Focus Unit: (300mm working table Z-axis adjustment)   

2. High Motion Speed: a.2032mm/sec (Engraving or Rastering)
                                     b.203.2mm/sec(Cutting or Vectoring)

3. High Resolution Engraving: 1200 DPI/600 DPI/400 DPI/300 DPI
    and lower DPI are available.(2400 DPI optional).

4. Good for big objects (material): EDF accommodates objects of 1300mm
    wide and has no constraints on the length of them with thickness less
    than 50mm.(so called Pass-Through function) 

 via following link to get the catalog:

1. 100W/200W : EDF-130090-Water Cooled 100W 200W CW RF Lasers - 2019-1203.pdf

Previous Back to List