We delivered a lots of compact fiber laser cutting systems in past 6 months. And we released some new attractive laser patterning systems to promising application fields.
Home
1
Laser Systems
2
*Custom-Made* Collections
3
SLB-025025-100~1000W Fiber4
https://www.laserlife-ezlaser.com/custom_77201.html SLB-025025-100~1000W Fiber SLB-025025-100~1000W Fiber SLB-025025 Laser Workstation for Laser Scribing , Laser Drilling and Laser Cutting( Working Area : 025 cm X 025 cm ; Single or Dual 100 W ~ 1000 W  CW , QCW or Pusle Fiber Laser Inside )   1. Laser Scribing + Laser Drilling + Laser Cutting for Alumina and other Ceramic Substrates Alumina (Al2O3) is the most common material, but we can also process other ceramics, including zirconia, aluminium nitride and boron nitride.Ceramic Drilling with fiber laser2. Laser Drilling + Laser Cutting for MetalsLaser drilling has become a widely used manufacturing solution in many industries. The primary advantage of laser drilling is that it is a non-contact process and hence mechanical wear of the drilling tool is not an issue. Other benefits include the flexibility to drill almost any material, the ability to change hole size, shape and approach angle instantaneously, the low heat input to the parent material and excellent hole-to-hole dimensional repeatability. In addition, the laser has the ability to drill small diameters not possible with conventional drilling techniques. Holes in the 10 micron region are possible with fiber laser technology. The common techniques used in drilling are percussion hole drilling and trepanning. Percussion drilling is a process where multiple pulses are applied per hole to achieve the desired results. On-the-fly drilling is a sub-set of percussion drilling where the target surface moves at high speed with respect to the laser beam and the laser is continuously pulses to produce holes. Trepanning is a process that allows cutting of large diameter holes or contoured shapes. Hole taper can be carefully controlled in the trepanning process. Lasers can rapidly switch from trepanned hole drilling to percussion drilling on-the-fly to produce a wide range of hole sizes in one part.The advantages of laser drilling have been accepted many years ago by the aerospace industry. Today, quasi-continuous wave (QCW) fiber lasers are rapidly superseding older flashlamp pumped technology for drilling large holes (0.2 - 1 mm). This type of hole can be made in a wide variety of aerospace components such as nozzle guide vanes, blades and cooling rings and combustors. QCW fiber lasers have a unique combination of high peak power and high pulse energy making them ideal for applications requiring multi-joule pulses in the millisecond regime. The flexible QCW laser can also be rapidly reconfigured for CW operation for cutting larger details.The microelectronics industry has employed laser drilling for a wide range of applications such as drilling alumina ceramic substrates. Drilling of small holes with diameter less than 10 μm is required at very high speeds, up to several thousands of holes per second. In this case, high peak power q-switched type fiber lasers or shorter variable pulsed fiber lasers are employed with pulse repetition rates up to 1 MHz and pulse lengths as short as 1.5 ns.High power fiber lasers are also currently used for rock drilling applications and for oil and gas exploration industries. The high peak powers and energy pulses are also used for drilling thick metals.Types of Metals : Stainless Steels / Carbon Steels / Gold & Silver / Aluminum / Tool Steels / Nickel Alloys / Brass & Copper / Titanium1.1 Ceramic Drilling with QCW fiber laser1.2 Percussion Drilling with QCW fiber laser1.3 Metal Microdrilling with nanosecond pulsed fiber laser 1.4 Shaped Hole with single 12 ms pulse  via following link to get the catalog:
~~ Compact Fiber Laser Cutter for Metals ~~ Different Models Including : CSB-090060 / CSB-060060 / CLB-126128 / CLB-090060



SLB-025025 Laser Workstation for Laser Scribing , Laser Drilling and Laser Cutting

( Working Area : 025 cm X 025 cm ; Single or Dual 100 W ~ 1000 W  CW , QCW or Pusle Fiber Laser Inside )   



a1ff6fd363212438057832488bb1d65c.JPG

81edea86b75181352e7d8f3c31abde27.JPG


38c1b76fd08192e984e6560b1a6ead5c.jpg


5f71b57cbaf2c71d4da8447fae241419.JPG


8bae61168fc4b1509964cfac5c74464c.JPG


5607031fc3aa2ed34e84e6ee64121bfd.jpg

bc5af67a716f7794e787b2268df70b55.jpg


12676f5f5634a634ae9260334a638373.JPG






1. Laser Scribing + Laser Drilling + Laser Cutting

for Alumina and other Ceramic Substrates

Alumina (Al2O3) is the most common material, but we can also process other ceramics, including zirconia, aluminium nitride and boron nitride.



Ceramic Drilling with fiber laser







2. Laser Drilling
+ Laser Cutting for Metals


Laser drilling has become a widely used manufacturing solution in many industries. The primary advantage of laser drilling is that it is a non-contact process and hence mechanical wear of the drilling tool is not an issue. Other benefits include the flexibility to drill almost any material, the ability to change hole size, shape and approach angle instantaneously, the low heat input to the parent material and excellent hole-to-hole dimensional repeatability. In addition, the laser has the ability to drill small diameters not possible with conventional drilling techniques. Holes in the 10 micron region are possible with fiber laser technology.


The common techniques used in drilling are percussion hole drilling and trepanning. Percussion drilling is a process where multiple pulses are applied per hole to achieve the desired results. On-the-fly drilling is a sub-set of percussion drilling where the target surface moves at high speed with respect to the laser beam and the laser is continuously pulses to produce holes. Trepanning is a process that allows cutting of large diameter holes or contoured shapes. Hole taper can be carefully controlled in the trepanning process. Lasers can rapidly switch from trepanned hole drilling to percussion drilling on-the-fly to produce a wide range of hole sizes in one part.


The advantages of laser drilling have been accepted many years ago by the aerospace industry. Today, quasi-continuous wave (QCW) fiber lasers are rapidly superseding older flashlamp pumped technology for drilling large holes (0.2 - 1 mm). This type of hole can be made in a wide variety of aerospace components such as nozzle guide vanes, blades and cooling rings and combustors. QCW fiber lasers have a unique combination of high peak power and high pulse energy making them ideal for applications requiring multi-joule pulses in the millisecond regime. The flexible QCW laser can also be rapidly reconfigured for CW operation for cutting larger details.


The microelectronics industry has employed laser drilling for a wide range of applications such as drilling alumina ceramic substrates. Drilling of small holes with diameter less than 10 μm is required at very high speeds, up to several thousands of holes per second. In this case, high peak power q-switched type fiber lasers or shorter variable pulsed fiber lasers are employed with pulse repetition rates up to 1 MHz and pulse lengths as short as 1.5 ns.


High power fiber lasers are also currently used for rock drilling applications and for oil and gas exploration industries. The high peak powers and energy pulses are also used for drilling thick metals.


Types of Metals : Stainless Steels / Carbon Steels / Gold & Silver / Aluminum / Tool Steels / Nickel Alloys / Brass & Copper / Titanium






















1.1 Ceramic Drilling with QCW fiber laser


1.2 Percussion Drilling with QCW fiber laser


1.3 Metal Microdrilling with nanosecond pulsed fiber laser


1.4 Shaped Hole with single 12 ms pulse




 via following link to get the catalog: